Filter
Top Products
www.gateway.com
61
6 Slide the new fan into the fan mount.
7 Insert the tabs on the rear of the fan mount into the slots
provided, then rotate the mount into place. The mount
should lock into place.
8 Reconnect the fan cable to the system board.
9 Replace the fan cover.
10 Replace the side panel by following the instructions in
“Replacing the side panel” on page 50.
Caution
Be careful not to catch the wires connecting the power button to
the system board when rotating the fan mount. A notch has been
provided for routing these wires.
8513162.book Page 61 Tuesday, May 20, 2008 4:09 PM