Filter
Top Products
GE Energy Services
BECCO2200 DCA
Configuration Guide
A164-0CG-1.00-2 Restricted
2
Full
Table 1 BECO2200 DCA Configuration Tables
1.2 Configuration Sequence
The following is a list of the steps required to configure the BECO2200 DCA:
1. Edit the A164 configuration. Prepare it according to the guidelines in this document and the
specific use for which the BECO2200 DCA is required.
2. Edit the configuration for all other applications that will run on the product. Prepare them
according to their own configuration guides.
3. Generate the configuration and download it to the product using the GE Energy Services
Configuration System provided. The list of applications to be compiled must include A164.
4. Restart the product. The BECO2200 DCA will check the validity of its configuration
parameters and begin its initialization. If it determines that a configuration parameter is
incorrect or encounters an error during its initialization, it will log a message to the
WESMAINT Error Log and then, depending on the severity of the error, terminate or
continue with its run-time function. Self-termination of the BECO2200 DCA prevents it from
running using invalid data.
5. Check for error messages. Log into the WESMAINT maintenance interface, select the
System Functions item from the Main Menu, and then select the Error Log item from the
System Functions Menu. If any error messages are displayed, correct the problem as
described in Appendix A: Messages Logged by the BECO2200 , and repeat steps 3 through 5.
Configuration is complete when the BECO2200 DCA has successfully validated all
configuration parameters.