Filter
Top Products
GE Energy Services
BECCO2200 DCA
Configuration Guide
A164-0CG-1.00-2 Restricted
16
Full
5.2.10 Type 7 Read Interval
This parameter specifies, in seconds, the minimum interval between Type 7 Read requests issued
to the device. A negative number configured indicates that no timed scans of this type are
required for this device. The device may, at any time, be scanned through the activation of the
Type 7 Read Pseudo Control.
☞
☞☞
☞NOTE: Do not use Type 3 Read if Type 7 is enabled.
5.2.11 Type 8 Read Interval
This parameter specifies, in seconds, the minimum interval between Type 8 Read requests issued
to the device. A negative number configured indicates that no timed scans of this type are
required for this device. The device may, at any time, be scanned through the activation of the
Type 8 Read Pseudo Control.
5.2.12 Time Synchronization Interval
This parameter specifies, in seconds, the minimum interval between Time Synchronization
requests issued to the device. A number less than or equal to zero indicates that no timed scans of
this type are required for this device. The device may, at any time, be scanned through the
activation of the Set Time Pseudo Control.