Filter
Top Products
GE Energy Services
BECCO2200 DCA
Configuration Guide
A164-0CG-1.00-2 Restricted
24
Full
8.2.1 Table Type
This parameter specifies the table type of the BECO2200 to write the data value. Valid Type
number is zero (0), one (1), two (2), and eight (8).
8.2.2 Point Number
This parameter specifies the point number of the table type of the BECO2200 to write the data
value. For M-0420 relay the valid points are as follows:
• Type 0: Points 14-23,26-28,70-73
• Type 1: Points 0-17,19,21-26 ,28-31
• Type 2: Points 1-9,13-18,20-23,25-28,30-32,34,38-41,45-52,57-65,69
• Type 8: Points 5
8.2.3 Data Value
This parameter specifies the value to be written to the data table of the BECO2200 Multifunction
Relay.
☞
☞☞
☞NOTE: The configured value is the value that will be written to the unit. No
scaling by the BECO2200 DCA will occur.