Filter
Top Products
21
FVR-C9S-7UX
Controlling Method for Keypad Panel
1) Monitor change
During the normal mode, frequency display and
output current display can be changed by
pressing the FUNC/DATA key.
2) Run/Stop
When F02 is _ _ 0): Press RUN to run drive; press STOP to stop drive.
3) Frequency change
When F01 is _ _ 0: Press UP to increase frequency; press DOWN to decrease frequency.
Note) If FUNC/DATA is pressed while pressing UP or DOWN, frequency changing speed
increases.
4) Function setting method
6 0. 0
1. 2 A
FUNC
DATA
FUNC
DATA
PRG
RESET
FUNC
DATA
RUN
STOP
FVR-C9S
8. 8. 8.
12. Keypad Panel
Part Names and Functions
Digital monitor:
In program mode, the key-
pad displays the various
function codes and data
values. During operation, it
displays the output fre-
quency, current, voltage,
etc. If a fault occurs, the
causes of the problem will
be displayed as a code.
PROGRAM key (RESET
key): Normal mode or
program setting mode
select key. If a fault occurs,
this key is used to reset the
fault.
FUNCTION key (DATA key):
During normal mode, this key can be used to
change the display unit (frequency display
and output current display) while operation is
either stopped or running. During the pro-
gram setting mode, this key can be used to
read and write the function codes and data.
RUN key: This key is used
for starting operation. The
LED (green) lights up during
operation. This key does
not function when terminal
operation control F02_ _ 1
is selected.
STOP key: This key is used
for stopping operation. This
key does not function when
terminal operation control
F02 _ _1 is selected.
UP/DOWN keys: These keys increase or
decrease the frequency. When unit is in
program setting mode, they change the
function code or data values.