10–22 MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
CONFIGURING TAG VLANS WITH ENERVISTA SOFTWARE CHAPTER 10: VLAN
Z Click on Port Settings in the Configuration >VLAN >Tag-Based
menu and enable the tagging for each port.
Z Repeat the last two steps for each of the ports and each of the
VLANs (click on port settings and enable the tag on the port).
After all the ports are tagged, the tagged column should change to “Yes” for all
VLANs
To check the status of the tagging,
Z Select the Configuration > VLAN > Tag-Based > Tagging menu.