5–24 MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
SYSTEM CONFIGURATION CHAPTER 5: IP ADDRESSING
3. Script Download (or Script Upload): Save the necessary CLI commands used
for configuration of the switch (or upload the necessary CLI commands
needed to configure the switch). This option is used to ease the repetitive task
of configuring multiple commands or reviewing all the commands needed to
configure the ML1600.
4. Host Download (or Host Upload): Save the host information. The hosts are
created by the Configuration - Access - Host commands
5. Log Upload - Save the log file on the ftp/tftp server
To save any changes,
Z Click on the save ( ) icon.
The software will ask again if the changes need to be saved or
ignored.
Z If the changes need to be ignored, click on Cancel and reboot the
switch.
Z If the changes need to be saved, click on OK.
The following figures illustrate saving changes made after adding an SNTP server. This is
done by clicking on the Save icon to save current configuration