Filter
Top Products
37
G-MAX
TM
N501 User’s Manual
1. Hold the card with its orientation symbol pointing into the slot and the
topside of the card facing up. The push-button latch may need to be in
before inserting the card.
2. Slide the card into the slot until it clicks into the connector.
3. If you encounter too much resistance, do not force the card. Check the
card orientation and try again.
Your notebook computer G-MAX N501 will recognize most PC Cards and
automatically load the appropriate device driver. If the configuration program
tells you to load the manufacturer's drivers, use the floppy disk or CD that
came with the PC Card.
4.1.4 Removing PC Cards
Before removing a PC Card, stop it running from the configuration
utility on the taskbar. Failure to do so could result in data loss. Never
try to remove a PC Card by pulling on its cable, if one is attached.
1. Press the release latch.
2. Press the latch again to eject the card.
3. Remove the card.