Filter
Top Products
38
G-MA
X
TM
N501 User
’
s Manua
l
4.2 Adding and Removing SD Cards
Before removing a SD Card, stop it running from the configuration
utility on the taskbar. Failure to do so could result in data loss.
Insert the SD card into the SD Card slot. This is the tiny slot below the PC
Card – the two slots are built into the same space together.
To remove the SD Card, press it in gently. It pops out automatically.
4.3 Printers
Check the printer documentation to check if your printer has a parallel
interface.
If your printer did not come with a suitable printer cable, you can purchase one
from a computer or electronics store.
These instructions are for a parallel printer, the most common type of
interface.
1. Turn off your notebook computer G-MAX N501.
2. Connect the printer cable to the printer and to your notebook computer
G-MAX N501's parallel port.
3. Plug the printer's power cable into an electrical outlet.
For further steps, refer to the documentation that came with your printer.
If you started your notebook computer G-MAX N501 with a printer connected
and turned on, it may have been detected automatically (Plug and Play). If not,
then you may have to install the printer driver for your printer, either using the
instructions provided with your printer, or contact your dealer for more
information.