Filter
Top Products
60
G-MA
X
TM
N501 User
’
s Manua
l
The next time you boot up your notebook computer G-MAX N501, the BIOS will
attempt to load the values you saved in Non-Volatile memory. If these values
cause the system boot to fail, reboot and press [F2] to enter the Setup
program. Once in Setup, you can try to change the values that caused the
system boot to fail. If the problem persists, load the default values (see Get
Default Values below).
If you attempt to exit the Setup program without saving your
changes, the program will prompt you with a message asking if you
want to save your changes before exiting.
• Exit Discarding Changes
This option can be used if you do not want to save the changes you have made
to the Setup program. The default is set to No. If you have made changes to
the fields other than system date, system time and password, the system will
ask for confirmation when choosing Exit Discarding Changes.
The system reboots using the original Setup values.
• Load Setup Default
This option allows you to load the default values for each of the parameters on
the Setup Menus. When this option is selected, a confirmation message
appears.