Filter
Top Products
59
G-MAX
TM
N501 User’s Manual
6.7 The Exit Menu
Once you have made all of your selections from the various menus in the Setup
program, you should save your changes and exit Setup. Select Exit from the
menu bar to display the following menu:
Pressing the [Esc] key can be used to close an open menu or
submenu. Pressing it again saves the current parameters and
reboots your notebook computer G-MAX N501.
Each of the options on this menu is described below.
• Exit Saving Changes
Once you are finished making your selections, choose this option from the Exit
Menu to ensure the values you selected are saved to Non-Volatile RAM.
Changes you made to the Setup program must be changed to Non-Volatile
RAM in order to make them operative. Non-Volatile RAM differs from standard
RAM memory in that it is sustained by an on-board battery and stays on even
when your notebook computer G-MAX N501 is turned off.
Once your selections have been saved, the Setup program asks you to confirm
your choice, and then reboot your notebook computer G-MAX N501.
System will reboot if OK is selected and will stay in Setup if Cancel is selected.