Filter
Top Products
HP LaserJet 1320nw printer
Power requirements (110) 110-127v (+/-10%), 50/60 Hz (+/-2)
Power requirements (220) 220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption ● During printing (22 ppm): 345 watts (average)
● During Ready (Standby) and PowerSave*:
6 Watts
* Instant on fuser technology
● Off: <1 watts
Minimum recommended circuit capacity for
typical product
● 4.5 amps at 115 volts
● 2.6 amps at 230 volts
Note
Values are current as of April 1, 2004. Values are subject to change without notice. See
http://www.hp.com/support/lj1160/ or http://www.hp.com/support/lj1320/ for current
information.
Note
The power reported is the highest value measured for monochrome printing using all
standard voltages.
Note
The default time from Ready mode to PowerSave mode and the recovery time from
PowerSave mode to the start of printing is negligible (less than 10 seconds) because of the
instant on fusing.
Note
The heat dissipation in Ready mode is 20 BTU/hour.
ENWW Electrical specifications 127