Filter
Top Products
Series 2040 Test System
Series 2040 Maintenance Manual V2.00 Diagnostics
23
If any failure(s) or problem(s) are found in a valid diagnostic file, the menu item
‘Report Details’ will be enabled to show some details about those tests. See
item ‘Report Details’ for more information.
If the diagnostic file is examined, and no fails or other problems were found
with this test, the ‘Results:’ box will display the message: “No Problem
Found” on a green background. The proper configuration for the Testhead
will be displayed, but the menu item ‘Report Details’ will be disabled, since
there are no failing tests on which to display information.
View Log File - Selecting this menu item opens a file selection window
showing the available files, similar to the ‘Open for EXam’ item. Selecting a
filename here will start the Microsoft Windows text editor program ‘WordPad’
and open the diagnostic file for viewing. Here, individual test results may be
viewed to provide further possible insight into any problems with the tester.
Viewing the individual failures of a test may aid in troubleshooting an
individual board. Examining any system error messages and referring to
documentation for the source and/or meaning of the error may also help in
resolving the problem with the tester resources. While viewing this file, the
user may also elect to print the file contents.
IMPORTANT!! The file being examined SHOULD NOT be edited. Changing
any information in these files could render the information inaccurate or
useless for diagnosing any problems with the tester.
Report Details - This menu item is only available while there is a valid
diagnostic file with fail information opened for examination. ‘Report Details’
is a listing of the individual Selftest programs that show at least one fail or
system error during its execution.
Selecting this menu item will
bring up a separate window
with a list of the failed test
programs. This list gives the
name of the Selftest which had
the problem, the slot number of
the board being examined by
that test, and whether the problem with the test was a test fail or a system