Filter
Top Products
2-1
Installing the Series 2300
and 2500 Switches
2
Installing the Series 2300 and 2500 Switches
The HP Series 2300 and 2500 switches are easy to install. They each come with
an accessory kit that includes the brackets for mounting the switch in a
standard 19-inch telco rack, in an equipment cabinet, or on a wall, and with
rubber feet that can be attached so the switch can be securely located on a
horizontal surface. The brackets are designed to allow mounting the switch
in a variety of locations and orientations.
This chapter shows you how to install your Series 2300 and 2500 switches.
Included Parts
The Series 2300 and 2500 switches have the following components shipped
with them:
■ HP ProCurve Series 2300 and 2500 Switches Installation and Getting
Started Guide (5969-2353), this manual
■ Customer Support/Warranty booklet
■ Accessory kit (5064-2085)
• two mounting brackets
• four 8-mm M4 screws to attach the mounting brackets to the switch
• four 5/8-inch number 12-24 screws to attach the switch to a rack
• four rubber feet
■ Power cord, one of the following:
The Series 2500 switches have these additional components:
■ HP ProCurve Switch Series 2500 Management and Configuration
Guide (5969-2354)
■ HP TopTools for Hubs & Switches - CD ROM and enclosure
■ Console cable
Australia/New Zealand
China
Continental Europe
Denmark
Japan
8120-6803
8120-8377
8120-6802
8120-6806
8120-6804
Switzerland
United Kingdom/
Hong Kong/Singapore
United States/Canada/Mexico
8120-6807
8120-8709
8120-6805
2353-ed2.book Page 1 Friday, February 9, 2001 6:00 PM