Filter
Top Products
Table 2-3 Configuration Page (2 of 2)
Callout Area on the screen Information or capability that the area
provides
4 Security Lists the status of the control-panel lock,
disk write-protect options, and direct-
connect (USB or parallel) ports.
You can change the status of the Direct
Connect ports on the Security screen
under the Settings tab by selecting or
clearing the Disable Direct Ports check
box.
5 Paper Trays and Options Lists the size and type of media that is
specified for each of the trays in the
product. If a duplexing unit or any paper-
handling accessories are installed on the
product, information about those devices
is also listed here.
6 Calibration Information Lists the last color-plane registration
(CPR) page count, the last CPR page-
count date, the last page count (in engine
cycles) for DMAX/DHALF, and the last
DMAX/DHALF page-count date.
Color plane registration occurs when
new print cartridges are installed to
compensate for any slight variations that
might occur in cartridge circumference.
DMAX is a density calibration of each
print cartridge color at 100% coverage;
DHALF is also a density calibration of
each print cartridge color, but as a
halftone instead of a full color. During
halftone printing, the dots of toner are
spread out, and coverage of the toner is
less than 100%.
7 Color Density Lists the cyan, magenta, yellow, and
black (CMYK) values for highlights,
midtones, and shadows.
12 Chapter 2 Viewing product status from the HP EWS Information screens ENWW
Information tab