Filter
Top Products
To test the configuration of a destination list
1 Click the Test button next to the destination list that you want to test. (If no permanent storage device
is installed, only one destination can be tested from this screen.)
The following screen appears.
Figure 3-6 Alerts – test screen
2 If you have a permanent storage device installed, select the destinations that you want to test.
3 The return address is the product's e-mail address. Type your e-mail address in the Return
Address field if you would like to receive messages about any errors that are generated from the
test alert (for example, to be notified of an incorrect destination address).
ENWW Alerts 37
Settings tab