Filter
Top Products
IP Routing Features
Configuring RIP
Displaying RIP Redistribution Information
To display RIP redistribution information, enter the following CLI command
at any context level:
HPswitch# show ip rip redistribute
RIP redistributing
Route type Status
---------- --------
connected enabled
static enabled
RIP automatically redistributes connected routes which are configured on
interfaces that are running RIP, and all routes that are learned via RIP. The
router rip redistribute command, described on
page 16-24, configures the
routing switch to cause RIP to advertise connected routes that are not running
RIP, and static routes. The display shows whether RIP redistribution is
enabled or disabled for connected and static routes.
Displaying RIP Redistribution Filter (restrict) Information
To display RIP restrict filter information, enter the following CLI command at
any context level:
HPswitch# show ip rip restrict
RIP restrict list
IP Address Mask
--------------- ---------------
The display shows if any routes, identified by the IP Address and Mask fields
are being restricted from redistribution. The restrict filters are configured by
the router rip restrict command described on
page 16-24.
16-32