Filter
Top Products
Troubleshooting
Unusual Network Activity
As a last resort, use the Clear/Reset button combination to reset the
switch to its factory default boot-up configuration. Taking this step
means you will have to reconfigure the switch to return it to operation
in your network.
No Communication Between the Switch and the TACACS+ Server
Application. If the switch can access the server device (that is, it can ping
the server), then a configuration error may be the problem. Some possibilities
include:
The server IP address configured with the switch’s tacacs-server host
command may not be correct. (Use the switch’s show tacacs-server
command to list the TACACS+ server IP address.)
The encryption key configured in the server does not match the
encryption key configured in the switch (by using the tacacs-server
key command). Verify the key in the server and compare it to the key
configured in the switch. (Use show tacacs-server to list the global key.
Use
show config or show config running to list any server-specific keys.)
The accessible TACACS+ servers are not configured to provide
service to the switch.
Access Is Denied Even Though the Username/Password Pair Is
Correct. Some reasons for denial include the following parameters
controlled by your TACACS+ server application:
The account has expired.
The access attempt is through a port that is not allowed for the
account.
The time quota for the account has been exhausted.
The time credit for the account has expired.
The access attempt is outside of the time frame allowed for the
account.
The allowed number of concurrent logins for the account has been
exceeded
For more help, refer to the documentation provided with your TACACS+
server application.
C-18