Filter
Top Products
4
G:\TW\Lori\Raptor\C4388-90100\exraptor1.fm Page 4
Last Modified: Tuesday, January 27, 1998 8:33 pm
Printing date: Saturday, April 04, 1998
Chapter 2: Connecting the
Hardware
Installing Your External Tape Drive
NOTE: Before you begin this installation, make sure your computer meets the
requirements listed in “Minimum System Requirements” on page 35.
The illustration above shows a hardware setup that will be similar to yours after you
complete the step-by-step installation instructions in this section.
WARNING: DO NOT, under any circumstances, open the external tape drive’s case.
If you suspect problems with your drive, service must be performed by a certified HP
technician. See the telephone numbers at the back of this manual.
Printer (if attached)
Tape Drive’s
Power Supply
and Power Cord
Tape Drive’s Data Cable
HP Colorado
External Tape Drive
Computer