Filter
Top Products
6 Installation Guide
G:\TW\Lori\Raptor\C4388-90100\exraptor1.fm Page 6
Last Modified: Tuesday, January 27, 1998 8:33 pm
Printing date: Saturday, April 04, 1998
3. Plug the tape-drive power cord into the drive.
NOTE: If it is ever necessary to cycle the power to your HP Colorado drive,
disconnect the power cord from the wall outlet. There is no power switch on the tape
drive.
The power supply is designed to automatically switch into low-energy mode when
the drive is not in use. The HP Colorado tape drive may be safely left plugged in at all
times.
4. Locate the parallel port connector on your computer (your printer might already be
attached to the parallel port).
If you have a printer attached to your computer, go to the next step.
If you do not have a printer attached, proceed to step 6.
Tape-drive power cord
Select any available parallel
port. Your tape drive can share
a parallel port with a printer.
Parallel ports have
receptacles for 25 pins.