Filter
Top Products
20 HP ProLiant DL560 Server Maintenance and Service Guide
To replace the component, reverse the removal procedure.
Hard Drive Blank
To remove the component:
CAUTION: To prevent improper cooling and thermal damage,
do not operate the server unless all bays are populated with either a
component or a blank.
To replace the blank, slide the blank into the bay until it locks into place.
CD-ROM Drive
To remove the component:
1. Power down the server ("Powering Down the Server" on page 16).
IMPORTANT: The ejector button is recessed to prevent accidental
ejection; it may be helpful to use the Torx T-15 tool on the back of the
server or similar shaped object to access the button.