Filter
Top Products
Removal and Replacement Procedures 47
Smart Array 5i Plus Memory Module
To remove the component:
1. Power down the server ("Powering Down the Server" on page 16
).
2. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 17
, "Removing the Server from the Rack" on page 18).
3. Remove the access panel ("Removing the Access Panel" on page 18
).
4. Remove the PCI riser cage ("PCI Riser Cage" on page 32
).
CAUTION: To prevent damage to the server or expansion
boards, power down the server and remove all AC power cords before
removing or installing the PCI riser cage.
CAUTION: Disconnecting the battery module cable will cause
any unsaved data in the memory module to be lost.
5. Disconnect and remove the Smart Array 5i Plus memory module cable.
6. Remove the Smart Array 5i Plus memory module.
To replace the component, reverse the removal procedure.