Filter
Top Products
Removal and Replacement Procedures 33
1. Power down the server ("Powering Down the Server" on page 16).
2. Extend the server from the rack, if applicable ("Extending the Server from
the Rack" on page 17
).
3. Remove the access panel ("Removing the Access Panel" on page 18
).
4. Disconnect any internal or external cables connected to any existing
expansion boards.
5. Remove the PCI riser cage.
To replace the component, reverse the removal procedure.
Expansion Board
To remove the component:
1. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 17
, "Removing the Server from the Rack" on page 18).
2. Remove the access panel ("Removing the Access Panel" on page 18
).