Filter
Top Products
Removal and Replacement Procedures 39
DC Converter Module
To remove the component:
NOTE: You do not have to remove the DC converter module to remove
the power module.
1. Power down the server ("Powering Down the Server" on page 16).
2. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 17
, "Removing the Server from the Rack" on page 18).
3. Remove the access panel ("Removing the Access Panel" on page 18
).
4. Disconnect internal power cables.
5. Partially remove any installed power supplies ("Hot-Plug Power Supply" on
page 24
). You do not need to completely remove the power supplies.