Filter
Top Products
Removal and Replacement Procedures 55
2. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 17
, "Removing the Server from the Rack" on page 18).
3. Remove the access panel ("Removing the Access Panel" on page 18
).
4. Remove the PCI riser cage ("PCI Riser Cage" on page 32
).
CAUTION: To prevent damage to the server or expansion
boards, power down the server and remove all AC power cords before
removing or installing the PCI riser cage.
5. Remove the power module ("Power Module" on page 37).
6. Remove the peripheral board ("Peripheral Board" on page 53
).
7. Remove the removable media tray ("Removable Media Tray" on page 51
).
8. Remove the front fan bracket ("Front Fan Module" on page 29
).
IMPORTANT: For this procedure, you do not need to remove the hot-
plug fans from the front fan bracket. When reinstalling the front fan
bracket, press the top of each fan to be sure it seats securely.
9. Remove the hot-plug fans from the rear fan bracket ("Hot-Plug Fan" on page
27
).
10. Remove the processors ("Processor" on page 44
).
NOTE: When removing the system board, you may leave the DIMMs,
the PPMs, the Smart Array 5i memory module, and the system battery
on the system board, unless you are replacing them as failed items.
11. Disconnect all cables connected to the system board.