Filter
Top Products
Removal and Replacement Procedures 57
14. Remove the system board.
NOTE: The system board spare kit does not includes DIMMs,
processors, PPMs, or the Smart Array 5i memory module.
To replace the component, reverse the removal procedure.
IMPORTANT: If replacing the system board or clearing NVRAM, you
must re-enter the server serial number through RBSU ("Re-Entering the
Server Serial Number" on page 58
).
Rear Fan Bracket
To remove the component:
1. Remove the system board ("System Board" on page 54
).
NOTE: When removing the system board, you may leave the DIMMs,
the PPMs, the Smart Array 5i memory module, and the system battery
on the system board, unless you are replacing them as failed items.