Filter
Top Products
1-3
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 1-3 (seq: 21)
This is the black on page 1-3 (seq: 21)
4 Close the plotter’s window and let the plotter run its automatic
cartridge-alignment procedure.
5 Switch off the plotter and your computer, connect the interface cable, and
then switch them on again.
6 Choose your driver disk(s), read the instructions on the label, and follow
any printed instructions accompanying the disks. For AutoCAD or
Microsoft Windows applications, the driver is shipped with the plotter.
For other applications, see page 1-38 for advice, and, if necessary, contact
your software vendor.
SETUP
1
Setting Up the Plotter
Fast Track