Filter
Top Products
1-7
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 1-7 (seq: 25)
This is the black on page 1-7 (seq: 25)
2
Using a flat-blade screwdriver, unscrew the cover plate at the back of the
plotter, and remove it. Unscrew only the four screws on the cover plate.
The two slots on the right are for memory expansion modules. Use slot 3
first, and then slot 4.
Slot for second memory module installed
Slot for first memory module installed
If your plotter has only one memory module, it must be in slot number 3.
1234
Cover plate
1845a
SETUP
1
Setting Up The Plotter
Task 2: (Optional) Install Memory Expansion Modules