Filter
Top Products
Scan two-sided documents from the ADF
1 Load your originals. See Load originals in the ADF.
2 Open HP Director. Click the Scan Document button in HP Director.
3 The HP Scanning dialog box appears.
4 Under Would you like to scan both sides of the original(s)? select Yes, scan
both sides, and then click Scan.
5 When you are finished scanning click Done, the software sends the scanned file
to the specified location.
One-sided scanning is the default method for the ADF. To change this default to two-
sided scanning, open HP Director on your desktop, click Settings, click Scan
Settings and Preferences and then click Scan Preferences. Click the Automatic
tab, and then select the setting that you want to assign as the default.
Note Not all page sizes can be scanned two-sided. See Choose acceptable media
for the ADF for more information about media.
If you are acquiring your scan from an imaging software program using TWAIN, the
HP Scanjet 7600 series Document ISIS/TWAIN software offers additional capabilities
for brightness and contrast, and improved performance and control for two-sided
scanning. For more information about installing the HP Scanjet 7600 series Document
ISIS/TWAIN software, see Installing scanner software.
Make copies from the ADF
You can use the Copy button ( ) to scan multiple originals from the ADF and send
them to a printer. The copy function defaults to the setting used the last time you
made copies. For more information, see Make copies.
User's manual 11