Filter
Top Products
Complete the scanning process
1 Place the transparent materials adapter (TMA) light source into the positioning
plate with the slides or negatives facing down. The TMA cable should fit in the
groove that is on the same end of the positioning plate as the reference marks.
Place the TMA light source on the positioning plate
2
Press the Scan Picture button (
) on the front of the scanner.
3 In the HP Scanning dialog box, select Scan slides using transparent materials
adapter or Scan negatives using transparent materials adapter. Click Scan.
4 When you are finished scanning, click Scan to scan another slide or negative, or
click Done.
If you want more control of the final selection area of the image for scanning, select
Show Preview in the HP Scanning dialog box, or use the Scan Slides/Negatives
button in HP Director. In the Preview dialog box, you can select the area of the slide
or negative that you want to scan. Click and hold a selection handle and adjust the
area to frame the final scan area of the image. You must then click the Accept button
in the preview screen to initiate the scan. The software sends the image to HP Image
Zone.
Final scan area
Note For information about rotating the image, adjusting color or size, or making
other changes to the image, see “Edit an image in the preview” section of the
onscreen Help.
User's manual 15