Filter
Top Products
Using the Small Form Factor Computer in a Tower
Orientation
The Small Form Factor computer can be used in a tower orientation. The HP logo plate on the front
bezel is adjustable for either desktop or tower orientation.
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 87).
2. Orient the computer so that its right side is facing down and place the computer in the optional
stand.
Figure 6-67 Changing from Desktop to Tower Orientation
NOTE: To stabilize the computer in a tower orientation, HP recommends the use of the
optional tower stand.
3. Lock any security devices that were disengaged when the access panel was removed.
NOTE: Ensure at least 10.2 centimeters (4 inches) of space on all sides of the computer remains
clear and free of obstructions.
142 Chapter 6 Removal and Replacement Procedures Small Form Factor (SFF) Chassis