Filter
Top Products
Rear Chassis Fan
The rear fan is mounted to the rear chassis wall and secured by four Phillips screws.
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 31).
2. Remove the computer access panel (
Computer Access Panel on page 34).
3. Disconnect the fan control cable from the red/brown system board labeled CHFAN2.
4. Remove the four screws that secure the fan housing to the chassis.
5. Remove the fan from the chassis.
Figure 5-40 Removing the rear chassis fan
To install the fan, reverse the removal procedure. Be sure to orient the air flow out of the unit.
Rear Chassis Fan 67