Filter
Top Products
5 Printing 54
Basic printing instructions
Basic printing instructions
This section provides the basic instructions for printing when setting options from the driver for this product (Windows) or the
Apple LaserWriter (Macintosh). If possible, you should try to set product options from the program in which you are working or
from the Print dialog box. Most Windows and Macintosh programs allow you to set the product options this way. If a setting is
not available in the program or driver, you must set it at the product control panel.
To print
1 Make sure paper is loaded in the product. See the introduce guide on the product CD, or at www.hp.com/support/lj9000
and “Orienting media” on page 47
for instructions.
2 If you loaded a custom size media in Tray 2, Tray 3, or Tray 4, or if you loaded any size media in Tray 1, set the tray to
recognize the size of paper you loaded. See the introduce guide on the product CD, or at www.hp.com/support/lj9000
.
3 Set the paper size.
For Windows: On the File menu, click Page Setup or Print. If you chose Print, make sure this product is selected and
click Properties.
For Macintosh: On the File menu, choose Page Setup. Make sure this product is selected.
4 In the paper size box, select one of the following:
The name assigned to the size of paper you are using.
Custom
5 Select the orientation, such as Portrait or Landscape.
6 If the driver is not already open, on the File menu click Print. In Windows programs, also click Properties.