Filter
Top Products
5 Printing 60
Printing special paper
Printing special paper
This section contains guidelines for printing on special media, which includes letterhead, transparencies, full-bleed images,
postcards, custom-size, and heavy paper.
Printing letterhead, prepunched paper, or preprinted paper (single-sided)
z When printing on letterhead, prepunched, or preprinted paper, it important to correctly orient the paper. See “Orienting
media” on page 47 for instructions.
z If the paper is heavier than 199 g/m
2
(53 lb bond) and less than 216 g/m
2
(58 lb bond), load it only in
Tray 1. See the introduce guide on the product CD, or go to www.hp.com/support/lj9000
for complete paper
specifications.
z When printing on both sides of prepunched paper, you must select prepunched paper as the paper type in the Paper
Handling menu from the control panel and select prepunched paper from your driver.
Printing labels
z Orient labels according to the guidelines in “Orienting media” on page 47.
z Print a stack of up to 50 sheets of labels from Tray 1.
z Use only labels recommended for laser printers. Make sure the labels meet the correct specifications. (See the introduce
guide on the product CD, or go to www.hp.com/support/lj9000
.)
CAUTION Failure to follow these instructions can damage the product.