Filter
Top Products
13
Release Notes for 07.8.04 Non-Redundant Management on ProCurve 9304M and ProCurve 9308M Routing Switches
management module, and also downloadable from the ProCurve website (see “To Download Product
Documentation:” on page 3).
Non-Redundant Management on ProCurve 9304M and ProCurve
9308M Routing Switches
Management modules without Redundant Management are sometimes termed “M1” modules (for “Management
1”). These modules, now discontinued, operate only in the ProCurve 9304M and ProCurve 9308M routing
switches. M1 modules include:
• J4141A ProCurve 9300 10/100 Management Module (16-port — discontinued)
• J4144A ProCurve 9300 Gigabit SX Management Module (8-port — discontinued)
• J4146A ProCurve 9300 Gigabit 4LX/4SX Management Module (8-port — discontinued)
NOTE: M1 management modules do not operate in the ProCurve 9315M routing switch. Also, if you are using an
M1 management module in a ProCurve 9304M or ProCurve 9308M, no other management module (non-
redundant or redundant) can be installed in the routing switch.
Maximum Size of Startup-Config and Running-Config Files
Each ProCurve device has a maximum supported size for the running-config and the startup-config file. If you use
TFTP to load additional information into a device’s running-config or startup-config file, it is possible to exceed the
maximum supported size. If this occurs, you will not be able to save the configuration changes.
Table 7 lists the maximum size of the running-config and the startup-config files on ProCurve devices.
NOTE: The maximum supported file size of each file is not the combined size of the running-config and startup-
config files. The running-config and startup-config files can each be the size listed in Table 7.
To determine the size of an ProCurve device’s running-config or startup-config file, copy the file to a TFTP server.
Then use the directory services on the server to list the size of the copied file. To copy the running-config or
startup-config file to a TFTP server, use one of the following commands.
• To copy the running-config to a TFTP server:
copy running-config tftp <ip-addr> <filename>
• To copy the startup-config file to a TFTP server:
copy startup-config tftp <ip-addr> <filename>
Table 7: Maximum Sizes Supported for running-config and the startup-config Files
Device Maximum Size of running-config
and startup-config files
ProCurve 9315 using Management II or
higher
256 kilobytes (KB)
ProCurve 9304M or ProCurve 9308M
using Management II or higher
256 KB
ProCurve 9304M or ProCurve 9308M
using Management I (discontinued)
128 KB
ProCurve 6308M-SX or ProCurve
6208M-SX (discontinued)
64 KB