Filter
Top Products
25
Release Notes for 07.8.04 Software Fixes
57594 The child route (more specific route) ages out from
CAM before the parent route, resulting in
blackholing of traffic.
System 07.8.00
57774 A Data Access Exception crash occurs when a
trunk is created without entering the trunk deploy
command and when the lead port is configured for
802.1w admin-pt2pt.
Spanning Tree 07.8.00
07.8.00p
57806 When you enter the no port security command, all
interface-level configurations are deleted.
Port Security 07.8.00
58718 FDP packets sent on a 10 Gigabit tagged interface
have incorrect VLANs. As a result, the FDP
neighbors are not seen.
FDP 07.8.00
58852 Software images earlier than release 07.8.00p
stored BGP community attributes that are only 256
bytes long.
Starting in release 07.8.00p, BGP community
attributes with lengths up to 4096 bytes can be
stored.
BGP 07.8.00
59014 Removing a VLAN group from a routing switch, on
which a large number of VLANs are configured,
causes a watchdog reset.
VLAN 07.8.00
59277 When you configure port mirroring and monitoring
using the Web interface, an error message is
displayed.
Web interface 07.8.00
59582 OSPF routes associated with an area are displayed
in the routing table for 60 minutes after changing the
area ID.
OSPF 07.8.00
60358 If the routing switch detects a BGP AS Path pointer
to be invalid, the switch resets the pointer to Null.
BGP 07.8.00
60732 When the PIM multicast routing protocol is enabled
for VLANs with tagged ports, the multicast packets
cause loss of buffers on the second packet
processor on the routing switch. Over time, this
results in buffer depletion and causes a loss of
connectivity.
PIM 07.8.00
61237 SSH corrupts data when the length of keys stored in
EEPROM is invalid.
SSH 07.8.00
61547 A memory leak occurs over time if you use SSHv2
to connect to the routing switch.
SSH 07.8.00
Bug ID Bug Description Protocol/
Feature
Version
Found
Version
Fixed