Filter
Top Products
Removal and replacement procedures
Maintenance and Service Guide 4–23
3. Turn the computer display-side up, with the front toward you.
4. Open the computer as far as possible.
5. Lift the rear edge 1 of the switch cover until it detaches from the computer.
6. Slide the switch cover 2 back far enough to access the keyboard screws.
7. Remove the four Phillips PM2.0×3.0 screws 1 that secure the keyboard to the computer.
8. Lift the rear edge 2 of the keyboard and slide the keyboard 3 back at an angle until the keyboard connector on
the system board is accessible.