Filter
Top Products
Removal and replacement procedures
Maintenance and Service Guide 4–29
Remove the display assembly:
1. Disconnect the display panel cable 1 and the webcam/microphone cable 2 from the system board.
2. Remove the WLAN antenna cables from the clips 3 built into the top cover.
3. Disconnect the TV tuner cable from the system board 4.
Ä
CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can
result in damage to the display assembly and other computer components.
4. Remove the four Phillips PM2.5×7.0 screws 1 that secure the display assembly to the computer.
5. Remove the display assembly 2.