Filter
Top Products
Removal and replacement procedures
Maintenance and Service Guide 4–31
10. If it is necessary to replace the webcam module, pull the webcam module 1 up to release it from the adhesive
strip.
11. Disconnect the webcam cable from the connector 2 on the webcam module.
12. If it is necessary to replace the display panel, remove the six Phillips PM2.5×4.0 screws 1 that secure the
display panel to the display enclosure.
13. Release the display panel 2 as far as the display logo LED board cable allows.
14. Disconnect the display logo LED board cable 3 from the display panel cable.
15. Remove the display panel. The display panel is available using the following spare part numbers:
❏ 519259-001 (17.3-inch, HD+ BrightView display panel, Espresso Black color in molded finish)
❏ 516295-001 (17.3-inch, HD+ BrightView display panel, Moonlight White color)
16. If it is necessary to remove the display panel cable, disconnect the display panel cable from the connector 1.
17. Remove the tape 2 that secures the cable to the display panel.