Filter
Top Products
Setting up and Installing the Interconnect Switch
Replacing an Existing Interconnect Tray
To replace an existing interconnect tray:
1. Upload the current switch configuration to a TFTP server. Refer to the “Saving Settings
to a TFTP Server” section in the management interface reference guides.
IMPORTANT: HP recommends saving the switch module configuration to a TFTP server once the
switch module configuration is complete or has changed.
Figure 2-5: Removing a hot-plug power supply
2. Press the port-colored latch to release one hot-plug power supply (1).
IMPORTANT: Port-color indicates hot-plug components.
3. Pull the handle to its open position (2).
4. Slide the hot-plug power supply out of the server blade enclosure (3).
5. Repeat steps 2 through 4 to remove the other hot-plug power supply.
Figure 2-6: Removing the old interconnect tray
6. Press both interconnect tray release buttons (1).
2-4 HP ProLiant BL e-Class C-GbE Interconnect Switch User Guide
HP CONFIDENTIAL Codename: DeLorean Part Number: 263682-002 Last Saved On: 2/5/03 10:41 AM