Filter
Top Products
Upgrading Firmware through the Serial Port
4. Configure the download protocol (ZModem or XModem) or use the default boot
configuration settings.
a. Within 60-90 seconds, press the Ctrl+C keys to display the Boot Configuration
Menu.
b. To use the default boot configuration settings, go to step 9.
Figure F-3: Boot Configuration menu
5. Select XModem or ZModem as the download protocol.
6. Highlight Reboot.
7. Press the Enter key. The switch module reboots.
HP ProLiant BL e-Class C-GbE Interconnect Switch User Guide F-3
HPCONFIDENTIAL Codename: DeLorean Part Number: 263682-002 Last Saved On: 2/5/03 10:50 AM