Filter
Top Products
Setting up and Installing the Interconnect Switch
Replacing a Patch Panel Tray
To remove the patch panel tray and install an interconnect tray:
Figure 2-9: Removing a hot-plug power supply
1. Press the port-colored latch to release one hot-plug power supply (1).
IMPORTANT: Port-color indicates hot-plug components.
2. Pull the handle to its open position (2).
3. Slide the hot-plug power supply out of the server blade enclosure (3).
4. Repeat steps 1 through 3 to remove the other hot-plug power supply.
Figure 2-10: Removing the patch panel tray
5. Press both interconnect tray release buttons (1).
6. Simultaneously pull both slate blue ejector levers toward the rear of the server blade
enclosure (2).
IMPORTANT: Slate blue indicates internal touch point components.
2-6 HP ProLiant BL e-Class C-GbE Interconnect Switch User Guide
HP CONFIDENTIAL Codename: DeLorean Part Number: 263682-002 Last Saved On: 2/5/03 10:41 AM