Filter
Top Products
Upgrading Firmware through the Serial Port
Figure F-4: Connection-established message
13. Before beginning the ZModem transfer, disable the Integrated Administrator escape
character to ensure a transparent connection for the file transfer. To disable this character,
press the following keys:
Ctrl+_ C L D
Your screen displays the following lines:
-----------------------------------------------------------------
Command: D)isconnect, C)hange settings, R)eboot Switch, E)xit
command mode > C
Change settings for: L)ocal Session, R)emote Port [Switch B],
E)xit >L
Change Local: C)ommunication Settings, D)isable Escape Character,
E)xit > D
The Escape Character <Ctrl>_ is now disabled. To re-enable it,
you must
press <Ctrl>_ twelve times in sequence.
Press [Enter] to continue:
-----------------------------------------------------------------
14. Press the Enter key to continue.
HP ProLiant BL e-Class C-GbE Interconnect Switch User Guide F-5
HPCONFIDENTIAL Codename: DeLorean Part Number: 263682-002 Last Saved On: 2/5/03 10:50 AM