Filter
Top Products
Light status State of the product Action
The wireless light is blinking. The product is attempting to locate a
wireless network.
No action is required.
The wireless light is on. The product is connected to a wireless
network.
No action is required.
The wireless light is off. The product is not connected to a
network, and the wireless unit in the
product might be turned off.
If the light is off, the product is not
connected to the network and the
wireless unit in the product might be off.
Press the wireless button to try
connecting to the network, or run the
Wireless Configuration utility to configure
the product. See
Use the Wireless
Configuration utility on page 27. To verify
that the product finds the network, print a
configuration page. The product should
have an IP address assigned to it.
For information about connecting
wirelessly to a network, see
Network
connection (wireless models only)
on page 24.
If the product remains unable to connect
to the network, uninstall and then reinstall
the product. If the error persists, contact
a network administrator or refer to the
user manual of the wireless router or
access point.
Table 8-2 Control-panel light patterns (continued)
72 Chapter 8 Solve problems ENWW