Filter
Top Products
NOTE: Sheets of width 329 mm (12.95 in) or less should be loaded from the multi-sheet tray.
1.
At the front panel, press
, then Load single sheet.
2. If a roll is already loaded, you have to wait while it is automatically unloaded.
3. Select your paper category and type. If you do not see your paper type in the front panel, press
More paper types. If you still cannot find your paper type in the whole list, see
The paper type
is not in the driver on page 98.
4. If your printer is a T520, open the roll cover.
5. When prompted by the front panel, insert the sheet into the right-hand side of the input slot.
WARNING! Do not push your fingers inside the printer's paper path.
6. Align the sheet with the blue line.
ENWW
Load a single sheet
37