Filter
Top Products
working with sound, pictures, and video
67
1 Open the bay cover (A on page 64). Hold the cover on each side near the
hinges, then lift the cover and slide it toward the back of the chassis (C on page
65). Gently lift it off.
To make it easy to insert the cables during step 3, grasp the tab (T) and pull it
out toward the front of the chassis (E on page 66). Replace the tab when done
threading the cables.
2 Place the camera cradle (H) (included with the camera) onto the DockSpot (J).
3 Place the DockSpot into the bay. Thread the data cables (K and L) and power
cable (M) through the cable tunnel opening at the back of the bay and connect
them to the DockSpot.
hp dvd writer & cd-writer
expansion / bay
h
p
p
a
vilio
n
0
0
0
0
xx
x
J
T
M
K
L
H
4 To prepare the new cover, push the two black dots on the inside to free
the insert section of the cover, and then move the insert up and out of the
cover (N).
N