Filter
Top Products
Connecting the Television Signal 27
Enabling and Disabling the TV option using the ATI Displays Graphics Card
When you want to disconnect the TV from the PC,
you may need to disable the TV option to return your
PC display to its original resolution.
To enable or disable the TV option to view your PC
image on the original display:
1 Right-click an empty area of the screen, and
choose Properties.
2 Click the Settings tab.
3 Click the Advanced button.
4 Click the ATI Displays tab. This tab shows a
monitor and a TV. The upper-left corner of
each display icon is a button and a status
indicator. A red corner indicates an inactive
display; a green corner indicates an active
display.
5 Click the upper-left corner of the TV icon so
it is red, and then click the upper-left corner
of the monitor icon so it is green. Click the
Apply button.
6 When the PC image appears on the TV
screen, click Yes to keep the setting. You have
15 seconds to accept this new setting before it
reverts to the previous setting.
7 Click the OK button to save changes, and
then click OK again to close the Display
Properties window.
Enabling and Disabling the TV option with ATI Catalyst Control Center
When you want to disconnect the TV from the PC,
you may need to disable the TV option to return your
PC display to its original resolution.
To disable the TV option to view your PC image on
the original display:
1 Right-click an empty area of the screen, and
choose ATI Catalyst Control Center.
2 Click the ATI Catalyst Control Center
button.
3 Click Displays Manager button. The
Desktop and Display Setup window appears.
4 Right-click the icon that represents the TV
display and select Enable.
5 Select Yes or No to keep your settings.
6 Click Finish.
.
n
Your TV must be
connected to the PC to
change the display.