Filter
Top Products
48 HP Media Center PC Getting Started Guide
Disabling digital audio output with Sound Effect Manager (optional)
To disable digital audio output:
1 Open the Sound Effect Manager:
Click Start, Control Panel, Sounds,
Speech and Audio, and then Sound
Effect Manager.
2 Click Audio Wizard. A window opens
displaying the connector panel on the front of
the PC.
3 Click the Digital Audio button. Select
Digital output off (you can also select
Digital-in to Digital-out pass through
mode).
4 Close the window.
If you select Enable digital audio output, the
microphone volume setting becomes active, the
recording source is fixed in Stereo Mix, and if you
place the microphone too close to the speakers,
feedback can occur.
Configuring Audio Output with Realtek HD Sound Effect
Manager
Follow these steps after you have installed and
connected your speakers, if your PC model has type
6 connectors and is capable of multi-streaming
audio.
To configure multichannel audio output for PCs with
Realtek HD Sound Effect Manager:
1 Click Start on the taskbar.
2 Click Control Panel.
3 Click Sounds, and then Speech and
Audio Devices (or Sounds and Audio
Devices).
4 Click Realtek HD Sound Effect
Manager. The window opens.
5 Click a button near the top of the window to
see that control screen.
n
If you do not see the
device for your
configuration, change
the speaker selection
in the Speaker
Configuration
window.