Filter
Top Products
1. Prepare to Install the Adapter Card
Before installing the SCSI/parallel adapter card, perform the following:
1. Observe antistatic precautions.
2. Verify product contents.
3. Record adapter card identification information.
4. Gather tools and accessories needed.
Observe Antlstatic Precautions
Thii product contains electronic components that can be damaged by static electricity. To
avoid damage, follow these guidelines:
n
Store printed circuit assemblies in their conductive plastic bags until you are ready
to install them.
m If possible, work in a static-free area.
m Handle printed circuit assemblies only by the edges. Do not touch electronic
components or electrical traces. We strongly recommend that you use a
grounding wrist strap that is connected to the metallic chassis of the host
computer. If you do not have a wrist strap, touch the chassis before handling
assemblies and frequently thereafter to equalize. any static charge.
Verify Product Contents
Unpack and identify a11 items supplied with the product:
n
SCSI/parallel adapter card
28655-60001
l
External SCSI terminator
1252-3920
l
SCSI port cable, 1 meter
5062-3383
m Parallel port cable, 2 meter’
5180-0010
l
Znsfaliution and Service manual
5960-3126
l
Parallel port cable is not supplied with HP XXX. The parallel port is not
supported on MPE XL systems.
Installing the Adapter l-3