Filter
Top Products
Removal/Replacement Instructions
This section describes removal and replacement instructions for the following items:
l
The SCSI/parallel adapter
n
SCSI/parallel adapter components
WARNING
Unless otherwise noted in your system manuals, removal of the
interface card should only be done with power removed from the
host computer. Failure to comply may result in an electrical
shock hazard, or in damage to the hardware.
CAUTION
The card contains electronic components that can be damaged by static
electricity. To avoid damage, follow these guidelines:
Store printed circuit assemblies in their conductive plastic bags.
If possible, work in a static-free area.
Handle printed circuit assemblies only by the edges. Do not
touch electronic components or electrical traces. We strongly
recommend that you use a grounding wrist strap that is connected
to the metallic chassis of the host computer. If you do not have a
wrist strap, touch the chassis before handling assemblies and
frequently thereafter to equalize any static charge.
Service Information 2-9